Showing posts with label image transfer. Show all posts
Showing posts with label image transfer. Show all posts

Wednesday, 1 September 2021

WOYWW 639: Catch-up, rusting, bleaching, image transfers, embossing...

I had to skip last week's WOYWW as I was super busy and I wouldn't have been able to visit everyone back. Hope you're all doing well. Where did summer go? Back in June, autumn seemed so distant and here we are in September! My son's starting Sixth Form tomorrow - scary! 

Despite being busy with other things, I still found time to create and experiment in the last two weeks. Here's a desk shot from yesterday. 


You'll notice the new TH media mat and heat tool, both of which I had been able to resist up until recently before giving in. That's the travel size mat - I hope it will allow me to keep at least that small area clear so I'll always have somewhere to create, even if the clutter overtakes the rest of my desk - that's the idea anyway - and so far it's been working! The heat tool is fantastic too - it's a gamechanger for me. The reason I hadn't got one before was because I already had a heat tool for embossing and I used a hairdryer to dry my layers (both on my head and on paper) but I always had to do those things away from my desk as everthing would get blown off - but not with this little tool! It's so quiet and I can use it sitting at my desk. It dries paint and melts powders much quicker too! Both came from Craft Stash and at much lower prices than I had seen elsewhere, so I'm happy! 

I've created a few bits and bobs in the last two week, but mainly I've been experimenting with rusting, bleaching, image transfers and embossing. I'll show you some of my results:

First off is a rusted and bleached piece of fabric - the bleach was stamped on a still wet surface and created this cool pattern - quite an unexpected and unintentional result:


More recently I've tried stamping bleach on my previously eco-dyed papers - it also works with stencils! I got more definition from my stamps on these surfaces:


The image transfer experiments below involved matte laminating sheets. Basically, if you laminate just one side of a laser print or a magazine image, you can remove the paper from the back (rubbing with water) and the image stays on the film with a semi-transparent background. And it works with inkjet prints too, if you print them on photo paper - this way you don't even need to rub off the paper, it just peels away. I'm sure it works with gloss lamination as well, but I prefer the silky feel of the matte finish. Here's a little visual summary of my results (with image credits to maremismallart and medievalmirage):


And finally, though not in this order, I've tried an embossing technique that involves stamping into melted embossing powders to create this metal effect (I also added some gilding wax to highlight the textures):

You can see some of these used in the projects below: 



There were a few other things I've made, but I'll post those next time! Happy #639! xx

Wednesday, 2 May 2018

WOYWW #465: Image transfer on glass

Hello on this rather dreary Wednesday. I'm not looking forward to my walk to work this morning, but I'm hoping the rain will let up by the time I have to leave. If not, hubby has offered to drive me as he's working from home today. I still have an hour before I have to leave, so I can squeeze in a quick WOYWW post.

I took this photo of my desk yesterday, while I was experimenting with image transfers on glass. There are a few new items on my desk. I've recently acquired a Mod Podge silicone mat and it's great when you need a seriously non-stick surface. Those pink moulds are silicone as well and will be featured in subsequent posts, no doubt.


My first project was a straightforward gel medium transfer of a laser printed image onto an empty glass coffee jar. I used the same technique to transfer an image onto canvas here but never tried it on glass before. It works just the same! This is what my finished project looks like:


This jar can serve multiple purposes: it can be used for storing art tools or as a decorative item stuffed with LED lights, which looks lovely at night:



My second project was inspired by a mishap while working on the Mona Lisa jar. I wanted to stick some napkin motifs on the empty sides of the jar, but ended up with a big sticky mess. Luckily, I was able to salvage the project and noticed that the varnish I used to seal the napkin pieces, once dry, created a protective film on the thin paper. Hmm, I thought, can I coat the napkin first and then stick on the pieces? Enter my new silicone mat and it worked like a charm!  

First, I brushed some satin varnish on the mat and then laid down the cut-out motifs and carefully added some more varnish on top. At this point the paper becomes very saturated and fragile but once dry, you can easily peel it off, like shown below:


You'll have to cut around the motifs again to get rid of the excess varnish on the edges, then you're ready to add them to your surface. I used gel medium to stick them on a glass jar. Technically, this is not an image transfer technique - more like decoupage. The napkin pieces look very much like decals. 


It was fun to fill the jar with coloured water - it looked like the fish were swimming in it.


In other news: Oreo seems to have taken a shine to my craft room lately. Here he is hogging my chair yet again. I think we need to lay down some ground rules, mister! He doesn't look like he's ready to negotiate, does he?


Thanks for stopping by today! Stay dry if you can! 
I'll be visiting everyone as and when time allows xx

Wednesday, 25 April 2018

WOYWW #464: Image transfers with the Gelli plate

Hello to all my WOYWW friends and other lovely people visiting! I'm here again for another round of desk share. Before I get started though, I must relay some news from Shoshi, who can't take part in WOYWW today. She's asked me to let you all know that she had to go back into hospital due to an infection last Monday. Hopefully, she's back home by now. Please send some healing thoughts her way for a speedy recovery! Get well soon, Shoshi!

Moving on to my desk: here's a photo I took yesterday, though the activities mainly took place over the weekend. I had just discovered a technique involving magazine image transfers with a Gelli plate after reading my bloggy friend, Lynette's recent post. She shared a video by Gelli Arts that I somehow managed to miss earlier.  When I first saw this technique, I literally had to drop everything and try it! This was the aftermath of my frantic printing session and it looks like Oreo got bowled over as well:



This technique works remarkably well under the right conditions, though sometimes it's a hit and miss affair. Luckily, some of my "fails" resulted in some exciting grungy textures. Images from a Vogue magazine worked best for me, but I didn't get good results with book pages. I've also tried transferring laser and inkjet prints but that didn't work at all. I think it's all about how the ink in the original image interacts with the paint on your Gelli plate. 

Here's an image imprint left on my Gelli plate, after I had applied a thin layer of dark paint and pulled it off with a magazine page. Some of the paint gets left behind and at this point, you should be able to see whether you will get a good transfer. Then it's just a matter of pulling the dark paint off with a lighter layer. (Please refer to the original video for full instructions.) The orientation of the final print will be the same as the original image, which is important when you want to transfer text. 



Here are a few other prints I pulled, mainly of people, but this technique can also be used to transfer other images (buildings, landscapes, objects, etc). I've found that high contrast images with a light background work best. 






And here are some of my fails that resulted in grungy textures. You might still be able to tell what the original image was. I will use these for backgrounds rather than focal points - in a way, they're more exciting and versatile than the successful image transfers! I might just have to create more fails on purpose!



I have a few more photos to share today. We built a huge fire at the bottom of  our garden on Saturday as we had a lot of garden waste to burn. This is what it looked like when it all burned down to ashes, just smoldering away, quietly - it was kind of magical in the setting sun - something I call a perfect moment, when everything is right with the world. The silly selfie with my son was taken half an hour earlier before the lights faded and later we had to run back to the house when a thunder storm erupted. It was all very atmospheric and I'm so glad I documented it! 





I'm off to work in an hour but I'll be around later in the week!
Thanks for all your visits - I always try to get back to everyone who comments!
Have a lovely day! 

Wednesday, 2 August 2017

WOYWW #426: Fragile II

I got a bit panicky yesterday realising I had nothing to share for WOYWW so I quickly got down to business. My project was inspired by an old Donna Downey class called Metamorphosis. I didn't take the class, but by using some of Donna's techniques I'd learned in her other classes, I attempted to emulate a similar look. I used a piece of heavyweight Khadi paper that acted almost like a canvas board and turned out to be the perfect substrate for this project. I coated one side with a mixture of joint compound (Polyfilla) and white gesso followed by a layer of ultra matte fluid medium, which provided an excellent surface for an image transfer. My desk shot was taken during the proceedings of the image transfer. It turned out near perfect, which is not always the case!


Following the image transfer, I added and partially removed a layer of quinacridone nickel azo gold and a layer of raw umber. By adding and removing the paint, it gets into the little crevices of the surface, creating some lovely texture. This is what it looked like at this stage:


Next, I did some stencilling with Payne's Grey acrylic paint...


...and then added the finishing touches of found poetry, doodles and paint marks and splatters.


Here are some close-up shots:




The found poetry concept is a godsent when you're lost for words. (The letter 'e' at the end of 'escape' got splattered with a drop of paint - I didn't notice this until after I took the photos, but I have now corrected it with a pen. There's always a chance of that happening!) Make what you want of my poem - it can have many interpretations. My current interpretation has got to do with our imminent house move, which is still hanging in the air. Hopefully, we'll know more next week.

While we're still here though, I took this photo of a rainbow over our housing estate. It was raining on one side of the house but not the other!


Instead of an Oreo photo this week, let me share this one of a very similar looking cat I came across online (and blatantly stole it). I find it so funny!


Hope you're having a good week! 
Happy WOYWW!

Saturday, 11 June 2016

Wanderlust: May book pages (image transfers with sticky tape)

I'm running slightly late with my Wanderlust book pages. The May prompts were (a) What I'm grateful for and (b) What I have to let go of. I must admit, originally, I didn't start these pages with these prompts in mind, but I kind of developed them along the way to fit the challenges. I also experimented with image transfers, specifically, using sticky tape (aka scotch tape, cello tape). I'll demonstrate this technique at the end of this post.

Here's my page for the first prompt. The large dragonfly is a gel transfer, the smaller one was done using sticky tape. The title of my page is "Adaptability" which is one of the things I'm grateful for. It's an important skill which allows you to adapt to your situation whatever life throws at you. The symbol for adaptability (amongst other things) is the dragonfly.





I started my second page by writing down all the negative things I want to let go of on a collaged/gessoed background, written in water soluble pencils, which I then dissolved, so they disappeared in front of my eyes. This is a great exercise to get rid of negative thoughts and influences. Then I printed the opposites of all those negative words to feature on my page. I used sticky tape transfers for these words and my main motif of the butterfly. Here are a few photos:


 



If you're not familiar with the sticky tape image transfer technique, it really is very simple. All you need is a laser printed image or an image from a magazine. Place the sticky tape over the top of your image (right side up) and burnish it, making sure there are no air bubbles. Cut it to the desired size and place it into a bowl of warm water. After a minute or two, rub off the paper from the tape. As if by magic, the ink will have transferred to the tape, leaving you with a transparent background. 

The tape usually retains its stickiness, just enough so you can stick it on your page as is, or you can use a thin layer of gloss gel to adhere it. Sticky tapes come in different sizes. The widest I could find is a 3" Scotch tape by 3M. This is great for transferring larger images, while you can use the smaller sizes for words, borders, etc. The challenge is, how to get rid of the glossy shine of the tape? Enter Ultra Matte Medium by Liquitex! A couple of coats of this stuff will eliminate the gloss and mattify the surface. It does tone down the colours slightly, but it's not a problem. The edge of the tape will pretty much blend into the background. This is by far the quickest and easiest image transfer technique I know! Here it is in pictures:

3" Scotch tape by 3M

Image transfer after removing the paper

The ultra matte medium will tone down the glossy reflection of the tape
Have fun playing and thanks for visiting!