Showing posts with label stamps. Show all posts
Showing posts with label stamps. Show all posts

Tuesday, 8 December 2015

Journal page with a modeling paste stamp

It's Tuesday again, so it's time to link up with Carolyn Dube's blog party Let's Play.

On this spread I experimented with a stamp I made from modeling paste and a stencil. The idea came from Carolyn's mini class 'Modeling Paste Stamps' which you can find here. This technique gives the stencil patterns a completely different look - kind of weathered and distressed. I'm sure I will use this method a lot in the future. Can you spot where I used the modeling paste stamp on my page?







This is the modeling paste stamp I used for this page. It was made using a Crafter's Workshop stencil and Liquitex Flexible Modeling Paste on black card. I used a brayer to spread the paint on top of the stamp. You get a different look if you apply a thicker layer of paint with a brush. You can reuse the stamp as often as you like, and you can even incorporate it in your artwork later with all the wonderful paint layers on it.  
Stamp made with modeling paste

Thursday, 9 October 2014

Make Your Own Texture Foam Stamps for the Gelli Plate

I'm writing this blog post as part of the Kraaft Shaak challenge for the month of October for the Kraafter's Kommunity. Anybody can join this wonderful kommunity (where we spell everything with a K!), so why don't you check it out! The theme this month is STAMPING.

In this blog post, I'm going to show you how to turn your rubber stamps and stencils into texturized foam stamps that you can use on the Gelli plate to create designs similar to these:


Materials required:

  • craft foam
  • iron
  • rubber or acrylic stamps and plastic stencils
  • 2 sheets of silicone coated paper (also referred to a parchment paper)
  • 2 flat surfaces (eg. hardback books or chopping boards)
The process:
  1. Place the following items on top of each other (in this order): a hard back book or chopping board, silicone paper, stencil or stamp (face up), craft foam cut to size, silicone paper.
  2. Place a medium hot iron (heat setting 2) on top of this pile and gently iron for a few seconds. When the foam begins to curl, you can stop.
  3. Quickly place another book or chopping board on top of the pile and put your weight on it. (I like to stand on it, but be careful if you do that!)
  4. In just a few seconds the foam will have cooled down sufficiently and have the imprint of the stamp or the stencil, ready to be used on your Gelli plate for texturing!



Some of the texturizing foam stamps I've made

Tips:
  • If the design hasn't transferred successfully, you can reheat the foam gently and start again! 
  • Don't burn the foam - as soon as it starts curling stop ironing!
  • Be careful with the iron! It's easy to get carried away with the excitement and forget about basic common sense. (Ask me how I know that!)
  • Don't use regular paper because the foam will fuse to it. (been there, done that!)
  • If your imprint is shallow, it may be because the foam wasn't hot enough, or the flat surfaces you're using are not entirely flat. 
  • I've got the best imprints when the foam was slightly smaller than the stencil or stamp. 
  • If your foam gets clogged with paint, you can try scrubbing it under the tap or just make new ones!
How to use your foam stamps on the Gelli plate?

Use  your foam stamps to remove paint from the Gelli plate and stamp them directly on existing prints. You can then either pull the layer immediately from the plate (on blank paper or on top of another print) OR you can let the paint dry on the plate and apply a thin layer of second colour on top, let it sit for a few minutes and then pull the print. Ta-da!

Have fun creating your own texturizing foam stamps for the Gelli plate! Here are  a few of my Gelli prints created with this technique:








UPDATE: Since publishing this post more than three years ago, I bought a Big Shot and now make my texture stamps using that. It's much easier! You can find out more about this other technique here.

Wednesday, 1 October 2014

WOYWW 278: Cheap stamps from China

I'm joining again in the WOYWW fun at the Stamping Ground! So what's on my dining room table work desk today? I've just received a couple of stamp sets that I ordered from Amazon last week. They were VERY cheap, so I didn't expect much and I was pleasantly surprised!

One of them is a vintage typewriter alphabet set with lower AND uppercase letters plus numbers and punctuation marks! 70 stamps in total! They are just the right size for cards, tags and art journalling. They come in a cute little wooden box. I've been wanting something like this for a while. I find the popular DoveCraft mini alphabet stamps a bit too small for my liking. These are slightly bigger. Here are some piccies:





Isn't it lovely? It cost £5.30 including delivery. I think that's really good value! I also bought a set of six decorative circle stamps, which cost a total of £1.59 with free delivery! I try not to think of the fact that these were probably made in a Chinese sweat shop. Just the postage would cost more than this in the UK!



I really like the quality of both sets. They're perfectly serviceable stamps and will be useful for my future projects. If you would like to buy these, I'll give you the direct links, but keep in mind that prices on Amazon fluctuate, so you might see different prices. Do shop around! (These are my affiliate links - if you'd rather not click on them, just search on Amazon directly.)


You will have seen in my first photo that I used the alphabet stamps to spell "Sunday Sentiments". I used that stamped image to create a digital banner for a weekly link party I'm planning to host, similar to WOYWW.  If you're intrigued and would like to find out more, please click on the banner below.

Tuesday, 22 July 2014

Black and white doodle cards

I had a few sheets of watercolour paper lying around that I had sprayed with Dylusions inks a few weeks ago for testing.  I wasn't sure what to do with them, until inspiration hit me this morning. I cut them into small cards, slightly larger than ATC size, and stamped some flower images on them in black archival ink. I used Rangers Jet Black ink pad, but there are lots of other similar products that would be just as good. I outlined the stamped images with a white Uniball gel pen and added some text and borders as well. You can use letter stamps instead of hand lettering if you prefer. I like how the black and white designs stand out against the coloured background. These cards are super easy to make and I find doodling very calming and therapeutic.

A word of caution about the Dylusions inks though: you may find that some of them fade rather quickly when exposed to sunlight. I left a sheet of paper originally sprayed bright pink in the conservatory about 4 weeks ago and it has gone completely pale! Therefore, be careful not to use these inks on projects exposed to bright sunlight - it would be a shame to see your hard work disappear in front of your eyes within just a few weeks. They should be safe inside your journals though, I assume.


Thursday, 10 July 2014

Lino cutting -my first attempt at stamp making!

How would you like to be able to make your own stamps? Well, you can! They will not be as detailed as the expensive shop-bought stamps, but you can achieve some pretty good effects buy cutting your own designs out of linoleum. All you need is a simple lino cutting tool set and some linoleum sheets to work with. (reviews coming up!)

The first step is to draw your design on the lino sheet. I just used a ball point pen for this. I started with something very simple: concentric and swirly circles.

Next, carefully follow your lines with one of the U-shaped blades. Keep in mind that what you cut away will be the uninked part of the design.

Be careful to always cut AWAY from your body and fingers! Don't press too hard - the cutting should be easy and smooth. You can always go over the grooves more than once to deepen them.

Some people like to carve out the background on the edge of the design, but I think it's easier to just cut around the shapes with a pair of old scissors.  Here are a few stamps that I made using this technique.


They work best with dye-based inks, I think, but you can also try pigment inks and even acrylic paint.  I've tried them with inktense blocks as well. You can find a related post here.

I'm very pleased with the results. You can use this technique to make borders, backgrounds, page accents, etc. I like making circle stamps, because they are very versatile. You can use them, for example, as the centre for flowers. Here's a flower layout I made using some of my lino stamps. You may not recognise that these are stamps because I doodled over them, but the flowers, stems and leaves are all stamped images. Creating with tools that you designed yourself is a very rewarding experience. Try it and you'll be amazed at how easy it is!